ID 1/23
Type Metering Equipments
Tester Clamp meter FLUKE CNX i3000, iFlex i2500-10
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 500 sar
More [Range 2500 A AC] [Resolution 0.1A to 999.9, 1A from 1000 to 2500] [Accuracy 3 % ± 5 digits] [Display 3-1/2 digits, LCD w/backlight] [Log rate/interval 1 sec minimum/adjustable by PC or front panel] [Battery type 2 AA, NEDA 15 A, IEC LR6] [Battery life 400 hours] [Memory record up to 65,000 readings] Expands the measurement range to 2500 A AC while providing increased display flexibility, Ability to measure awkward sized conductors and improved wire access. CAT IV 600 V, CAT III 1000 V. 7.5 mm coil diameter allows measurement in tight spaces. Ergonomic design allows easy operation with one hand. 1.8 m (6 ft) Cable.
More Details
ID 1/81
Type Insulation Resistance Test Set
Tester HY2306 Insulation TESTER
Make WUHAN HUAYING ELECTRIC POWER TECH&SCIENCE CO., LTD
Qty 1
Cond. used
City Dammam
Price 4,800 sar
More Specification 1. Measuring range and accuracy (Temperature, humidity: 23± 5º C, 45~75%RH) 2. Rated voltage: 5000V: 0.0~99.9MΩ 100~999MΩ 1.00~9.99GΩ 10.0~99.9GΩ 100~200GΩ 10000V: 0.0~99.9MΩ 100~999MΩ 1.00~9.99GΩ 10.0~99.9GΩ 100~400GΩ 4. Short-circuit Current: Approx 3.3mA 5. Accuracy: ± 5%± 3dgt 100GΩ Or more ± 20%
More Details
ID 1/80
Type Metering Equipments
Tester Electrical Tester (FLUKE T6-1000)
Make FLUKE
Qty 1
Cond. new
City Dammam
Price 1,110 sar
More The Fluke T6-1000 Electrical Tester with Field Sense™ technology lets you quickly, safely take True rms voltage and current measurements without test leads. Measure voltage to 1000 V AC without test leads. Simultaneously measure voltage and current. 17.8 mm open fork is widest in the industry. Measure up to 200 A on 4/0 wires (120 mm2).
More Details
ID 1/79
Type Metering Equipments
Tester True RMS Multimeter FLUKE-87 V
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 1,181 sar
More Voltage DC [Maximum voltage 1000 V Accuracy ±(0.05% + 1) Maximum resolution 10 µV] Voltage AC [Maximum voltage 1000 V Accuracy ±(0.7% + 2) True RMS AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution 0.1 mV] Current DC [Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(0.2% + 2) Maximum resolution 0.01 µA] Current AC [Maximum amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(1.0% + 2) True RMS Maximum resolution 0.1 µA]
More Details
ID 1/78
Type Metering Equipments
Tester Remote Display True RMS Multimeter-FLUKE 233
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 1,806 sar
More The Fluke 233 Digital Multimeter with its removable display gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. True RMS Digital Multimeter with detachable display. Measures up to 1000 VAC and DC. Measures up to 10 A (20 A for 30 seconds). Provides a 10,000 μF capacitance range. Measures frequency to 50 kHz. Includes a built-in thermometer to measure temperature without a separate instrument.
More Details
ID 1/77
Type Metering Equipments
Tester WIRELESS AC VOLTAGE CNX v3000
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 547 sar
More True-RMS AC and DC voltage measurements to 1000V True-RMS AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance, and frequency measurements True-RMS AC voltage measurements to 1000V ±1% accuracy to 500 Hz, ± 2% accuracy to 1 kHz True-RMS AC and DC voltage measurements to 1000V Continuity, resistance, diode test, capacitance and frequency measurements Make measurements on your CNX 3000 while simultaneously viewing True-RMS AC voltage measurements on your remote CNX v300 Memory recording up to 65,000 readings
More Details
ID 1/60
Type Metering Equipments
Tester WIRELESS AC CLAMP CNX a3000
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 597 sar
More The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools. True-RMS AC current measurements to 400 A [2% accuracy to 100 Hz, 2-1/2% accuracy to 500 Hz] [Memory recording up to 65,000 readings] [Backlit LCD display] [Range 0.5 A to 400.0 A] [Resolution 0.1 A] [Accuracy 400.0 A: 2 % ± 5 digits (10 Hz to 100 Hz), 2.5 % ± 5 digits (100 Hz to 500 Hz)] [Inrush Max displayed reading: 999.9A] Crest factor (50 Hz/60 Hz) 3 at 500 A, 2.5 at 600 A, 1.42 at 1000 A, add 2 % for C.F. > 2 LCD w/backlight 3½ digits Battery type 2 AA, NEDA 15 A, IEC LR6 Battery life 400 hours Memory Record up to 65,000 readings RF communications 2.4 GHZ ISM Band RF communication range 20 meters Operating temperature -10 °C to +50 °C Storage temperature -40 °C to +60 °C
More Details
ID 1/5
Type Metering Equipments
Tester IR THEMOMETER 62 MAX
Make FLUKE
Qty 1
Cond. new
City Dammam
Price 395 sar
More Highlights Braced To Ensure Both Resilience And Versatility Attributes. Premium Housing Construction Proffers Added Protection Against Elemental Hazards. Sprucely Crafted To Render A Long Lifespan Ensuring Extensive Usage. Specifications [Water Resistance IP54] [Drop Tested Up to 3 m] [Power Supply Battery 1xAA] [Colour Name: Yellow/Black] [Model Number 62 MAX]
More Details
ID 1/70
Type Metering Equipments
Tester 192C SCOPEMETER COLOR -FLUKE
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 6,931 sar
More For demanding applications the Fluke 192C ScopeMeter series high-performance oscilloscope offers specifications usually found on top-end bench instruments. The Fluke ScopeMeter 192C has a dual input, 60 MHz bandwidth and 500 MS/s real-time sample rate. The instrument also features a high resolution color display and a high waveform resolution of 3000 data points per channel. Features: Bandwidth: 60 MHz Real-time sample rate: 500 MS/s Minimum timebase range: 10 ns/div 144mm full color LCD Inputs: 2 plus external /DMM input Digitizers: 2 Waveform reference with automatic Pass/Fail testing 1000 V CAT II saftey rating 600 V CAT III safety rating
More Details
ID 1/76
Type Tools
Tester Ratchet Screw Driver -ENGINEER DR01
Make ENGINEER
Qty 1
Cond. used
City Dammam
Price 29 sar
More The benefit of ratcheting screwdrivers is that you can get a firm grip on their handle and apply plenty of torque repetitively without adjusting your grip.
More Details
ID 1/75
Type Protection Relays
Tester Electromechanical Relay -MVAX12R1CB0757A ALSTOM
Make ALSTOM
Qty 1
Cond. new
City Dammam
Price 1,091 sar
More MVAX relays supervise the trip circuit of a circuit breaker, initiating audible alarms and visual indications if the trip circuit fails or the mechanism does not operate. The storage temperature range is —25 degree C to +70 degree C. Apply 75% of the relay's lower voltage of the voltage rating range. Check that the relay operates satisfactorily and that the flag indication can be reset. Reduce the voltage slowly until the relay drops-off. Check that this occurs between 25% to 40% of the lower voltage rating. Replace all links and fuses. Check that the relay operates and manually reset the flag. With alarm circuits operational, temporarily remove a trip supply fuse. Check that the appropriate alarms are initiated. Replace the fuse and reset the relay flag.
More Details
ID 1/74
Type Protection Relays
Tester Electromechanical Relay -MVAJ105RA0802A-ALSTOM
Make ALSTOM
Qty 1
Cond. new
City Dammam
Price 1,370 sar
More The relays are built around a simple magnetic latch system which holds the attracted armature unit in the operated state. Versions have either one or two elements depending upon the number of output contacts required. The contacts themselves have been designed specifically to minimise the amount of contact bounce experienced on the relay. Relay configured for high burden operation, as supplied, the burden is reduced to approximately 100W for 40- 60ms before being cut off to either zero or an economised level. Specifications: It has 10 contacts Hand and electrical reset Operative range 66V - 150V Operate time <8ms
More Details
ID 1/73
Type Protection Relays
Tester Electromechanical Relay -MVAA11R1CA0783C ALSTOM
Make ALSTOM
Qty 1
Cond. new
City Dammam
Price 1,250 sar
More The recommended maximum rating of the external protective fuse for this equipment is 16A, Red Spot type or equivalent, unless otherwise stated in the technical data section of the product documentation. This equipment requires a protective (safety) earth connection to ensure user safety. Distribution level, fixed installation. Equipment in this category is qualification tested at 5kV peak, 1.2/50µs, 500Ω, 0.5J, between all supply circuits and earth and also between independent circuits With the armature closed onto a 0.013" feeler gauge the flag should be free to fall, but should not fall using a 0.018" feeler gauge. Adjustment is made to the catch spring on the flag.
More Details
ID 1/72
Type Protection Relays
Tester Earth Fault Indicator - SEC
Make HORSTMANN GERMANY
Qty 1
Cond. new
City Dammam
Price 200 sar
More Power supply: 110 to 240 V AC Changeover contact - 1 one External LED is available.
More Details
ID 1/71
Type HV Cable Test Set
Tester VLF VOILA
Make BAUR
Qty 2
Cond. used
City Dammam
Price 75,000 sar
More The portable BAUR viola and viola TD devices are used for – testing medium-voltage cables and electrical equipment (generators, transformers and switchgear) – cable sheath testing – cable diagnostics (viola TD): - Dissipation factor measurement and Monitored Withstand Test with tan δ - Partial discharge measurement* - Full Monitored Withstand Test with tan δ and partial discharge measurement* Output voltage Frequency range 0.01 – 0.1 Hz VLF truesinus® 1 – 44 kVrms (62 kVpeak) VLF square wave voltage 1 – 60 kV DC voltage ±1 – 60 kV Resolution 0.1 kV Accuracy 1 % Load range (VLF testing) 1 nF – 10 µF Output current Measurement range 0 – 70 mA Resolution 1 µA Accuracy 1% Max. capacitive load 0.85 μF at 0.1 Hz, 44 kVrms / 62 kVpeak 2.7 μF at 0.03 Hz, 44 kVrms / 62 kVpeak 7.7 μF at 0.01 Hz, 44 kVrms / 62 kVpeak
More Details
ID 1/69
Type Metering Equipments
Tester IR THERMOMETER 62 MAX+
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 530 sar
More IR Thermometers have the precision you need to do your job accurately and will not break the budget. Designed and tested to survive a 3 meter drop, you can count on these lightweight, compact infrared thermometers to work when you need them to work–even in the harshest environments and when you’re not able to be there (64 MAX). TEMPERATURE RANGE -30 °C to 650 °C (-22 °F to 1202 °F) TEMPERATURE ACCURACY ± 1.0 °C or ± 1.0 % of reading, whichever is greater ± 2.0 °C at -10 °C to 0 °C ± 3.0 °C at -30 °C to -10 °C
More Details
ID 1/68
Type Metering Equipments
Tester Sound Level Meter SM 20 A
Make AMPROBE
Qty 1
Cond. used
City Dammam
Price 1,772 sar
More Measuring ranges: A weighting 30 – 130 dB, C weighting 35 – 130 dB Frequency range: 31.5 Hz – 8 kHz Display with 0.1 dB steps on a 4 digit LCD Slow (1 sec) and fast (125 ms) response settings to check peak and average noise levels Max/min recording Internal memory, 14,000 records Recording intervals from 1 second to 8 hours PC computer download capabilities Data hold to freeze reading on digital display
More Details
ID 1/67
Type Tools
Tester Interchangeable precise manual tool set JK6089A
Make JACKLY
Qty 1
Cond. used
City Dammam
Price 31 sar
More Specification: - This is jackly tool kits .32 in 1 - Handle + bits fitted into an aesthetically designed ABS + PVC plastic case - Hardness: 52-56HRC We are offering Jackly Tool Kits to our client.
More Details
ID 1/66
Type Metering Equipments
Tester Analog Multimeter AM-6 CAT-II
Make GREENLEE
Qty 1
Cond. used
City Dammam
Price 26 sar
More Technical Details: DC voltage range 5 - 300 V AC voltage range 15 - 300 V AC current range 0.5 - 30 A DC current range 0.5 - 30 A Resistance range 1 - 1000000 Ω - Easy to read, multi-function display - AC/DC voltage, DC amperagemeasurement - Built-in test leads, no loose parts to lose - Resistance measurement - Tests 1.5 V and 9 V batteries - Accessories included: (1) 1.5 V AA battery
More Details
ID 1/65
Type Metering Equipments
Tester TRUE RMS AUTOMATIC TESTER CMT-90
Make GREENLEE
Qty 1
Cond. used
City Dammam
Price 422 sar
More Measurement capabilities: AC and DC voltage, AC current,true RMS and resistance. It also verifies continuity. Specifications Display: 10,000-count LCD Maximum Conductor Size: 33 mm (1.30") Display update rate is 4 per second for voltage, 2 per second for resistance, and 1 per second for current Operating Conditions: Temperature: 0 °C to 30 °C (32 °F to 86 °F), 0% to 80% relative humidity 30 °C to 40 °C (86 °F to 104 °F), 0% to 75% relative humidity 40 °C to 50 °C (104 °F to 122 °F), 0% to 45% relative humidity Altitude: 2000 m (6500') maximum Storage Conditions: –20 °C to 60 °C (–4 °F to 140 °F), Pollution Degree: 2 Battery: 9 V battery Battery Life: Approximately 250 hours with alkaline battery
More Details
ID 1/64
Type Metering Equipments
Tester Clamp Multimeter CM-1350
Make GREENLEE
Qty 2
Cond. used
City Dammam
Price 691 sar
More Specialized functions: • Auto ranging • Backlit display • Data hold • MIN MAX hold • Peak hold • 42-segment bar graph Specifications: [Display: 3-3/4–digit LCD (4000 maximum count) Sampling Rate: Numeric Display: 1.5 per second Bar Graph Display: 13 per second Jaw Opening: 47 mm (1.85") Operating Conditions: Temperature: 0 °C to 30 °C (32 °F to 86 °F), 0% to 80% relative humidity, noncondensing 30 °C to 40 °C (86 °F to 104 °F), 0% to 75% relative humidity, noncondensing 40 °C to 50 °C (104 °F to 122 °F), 0% to 45% relative humidity, noncondensing Altitude: 2000 m (6500') maximum Storage Conditions: –20 °C to 60 °C (–4 °F to 131 °F), Pollution Degree: 2 Battery: One 9 V battery Battery Life: Approximately 200 hours with alkaline battery
More Details
ID 1/63
Type FT SWITCH
Tester FT1- R073
Make ABB
Qty 1
Cond. new
City Dammam
Price 750 sar
More Condition: New, unused, undamaged item. ABB Flexitest Switches, Types FT-1 (10 pole, rear connected) and associated Test Plugs provide a safe, simple, fast and reliable method to isolate and service installed equipment.All Flexitest Switches are rated at 600 volts and 30 amps.
More Details
ID 1/62
Type FT SWITCH
Tester FT1-R001
Make ABB
Qty 3
Cond. new
City Dammam
Price 747 sar
More ABB Flexitest Switches, Types FT-1 (10 pole, rear connected)and associated Test Plugs provide a safe, simple, fast and reliable method to isolate and service installed equipment.All Flexitest Switches are rated at 600 volts and 30 amps.
More Details
ID 1/59
Type Metering Equipments
Tester Voltage and Continuity Tester GT95 GREENLEE
Make GREENLEE
Qty 4
Cond. new
City Dammam
Price 333 sar
More They have non-contact and single-probe voltage detection capability. This model can trip a ground-fault circuit interrupter (GFCI). [Polarity: Automatic] [Voltage Range: 19 to 1000 VAC, 5 to 1000 VDC] Input Impedance: 460 kΩ || 160 pF (nominal) Number of LEDs: 14 AC Tolerance: ± (2.5% of reading + 4 V) DC Tolerance: ± (1% of reading + 2 V) Frequency Range: DC and 45 to 65 Hz Test Current: Less than 2.5 mA Detection Frequency: 50/60 Hz Detection Antenna: Top of unit Display: 3-digit LCD (999 maximum count) Voltage Resolution: 1 V (AC or DC) LCD Accuracy: ACV: ± (2.5% of reading + 4 V) DCV: ± (1% of reading + 2 V)
More Details
ID 1/61
Type Metering Equipments
Tester Motor & Phase Rotation Indicator FLUKE 9062
Make FLUKE
Qty 2
Cond. used
City Dammam
Price 1,048 sar
More The unique Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection. Technical specifications: Voltage range Up to 400 V Phase display 120-400 V AC Frequency range 2-400 Hz Environmental specifications Operating temperature 0 °C to 40 °C Operating altitude Up to 2000m Humidity (without condensation) 15% to 80% Dust/water resistance IP 40 Safety specifications Electrical safety EN 61010, EN 61557-7 Overvoltage category CAT III, 300 V Mechanical and general specifications Size 124 x 61 x 27 mm Weight 1 x 9 V Batteries 1 x 9 V
More Details
ID 1/58
Type Metering Equipments
Tester AC/DC CLAMP METER - FLUKE 353
Make FLUKE
Qty 6
Cond. used
City Dammam
Price 2,813 sar
More All 6 Clamp meters are Available in Good condition. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. Current measurement DC and AC 10 Hz to 100 Hz Range 40 A / 400 A / 2000 A / 1400 AC RMS Resolution 10 mA / 100 mA / 1 A Accuracy A: 1.5% rdg + 15 digits Trigger level for Inrush 0.50 A / 5.0 A / 5 A Trigger level for Hz filter OFF 2.50 A / 2.5 A / 8 A Trigger level for Hz filter ON 0.50 A / 2.5 A / 8 A Crest Factor1 2 @ 33 A, 2.4 @ 27 A 2 @ 330 A, 2.4 @ 270 A 2 @ 1000 A, 2.4 @ 833 A Frequency measurement Measurement range 5.0 Hz to 1 kHz Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz) Accuracy – 5.0 Hz to 100 Hz 0.2% + 2 counts Accuracy – 100.1 Hz to 1 kHz 0.5% + 5 counts
More Details
ID 1/57
Type Power Meter & Power quality Meter
Tester POWER QUALITY ANALYZER -FLUKE 434
Make FLUKE
Qty 1
Cond. used
City Dammam
Price contact (00966)0561464111 for a deal
More Cables and Adabtor not available. The Fluke 435 three-phase power quality analyzers help you locate, predict, prevent and troubleshoot problems in three- and single-phase power distribution systems. [Voltage inputs Number of inputs 4 (3 phases + neutral) dc-coupled Maximum input voltage 1000 Vrms Maximum peak measurement voltage 6 kV] [Current inputs Number of inputs 4 (3 phases + neutral) dc-coupled Range 1 Arms to 400 Arms with included clamps (i400S) 0.1 Arms to 3000 Arms with optional clamps] [Nominal frequency 40 Hz to 70 Hz] Maximum sampling speed 200 kS/s on each channel simultaneously. Display update rate 5x per second
More Details
ID 1/56
Type Power Meter & Power quality Meter
Tester POWER QUALITY ANALYZER-FLUKE 434
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 25,856 sar
More Adapter is not available, The Fluke 434 model help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems. [Vrms (AC + DC)=1 V to 1000 V phase to neutral ±0.1% of nominal voltage] [Vpk= 1 Vpk to 1400 Vpk 5% of nominal voltage] [0.5 Arms to 600 Arms with included i430flex-TF (with sensitivity 10x) 5 Arms to 6000 Arms with included i430flex-TF (with sensitivity 1x) 0.1 mV/A to 1 V/A and custom for use with optional ac or dc clamps] Displays 4 cycles of waveform data on screen, up to 4 waveforms simultaneously
More Details
ID 1/55
Type Metering Equipments
Tester Clamp Meter [ACD15 TRMS Pro] 600 V / 2000 A
Make AMPROBE
Qty 1
Cond. new
City Dammam
Price 622 sar
More ■ True RMS ■ Backlight ■ Measurements: AC/DC Voltage up to 600V, AC Current up to 2000A Resistance, Frequency and Capacitance ■ Non-contact Voltage Level Detection ■ Audible continuity ■ Auto-check feature automatically selects DCV, ACV or Resistance (W)
More Details
ID 1/54
Type Metering Equipments
Tester Multimeter 77 IV
Make FLUKE
Qty 1
Cond. new
City Dammam
Price 1,675 sar
More [Voltage DC Range 6 V – 1000 V Best accuracy ±(0.3% + 1) Best resolution 0.1 mV] [Voltage AC Range 600.0 mV – 1000V Best accuracy ±(2.0% + 2) Best resolution 1.0 mV] [Amps AC Range 60.00 mA – 10 A Best accuracy 2.5% + 2 Best resolution 0.01 mA] [Amps DC Range 60.00 mA – 10A Best accuracy 1.5% + 2 Best resolution 0.01 mA] [Resistance Range 600.0 Ω – 50 MΩ Best accuracy ±(0.5% + 1) Best resolution 0.1 Ω] [Capacitance Range 1nF – 9,999 μF Best accuracy ±(1.2% + 2) Best resolution 1 nF] [Frequency Range 99.99Hz – 99.99kHz Best accuracy ±(0.1% + 1) Best resolution 0.01 Hz]
More Details
ID 1/53
Type Metering Equipments
Tester AC Current Clamp i3000s
Make Fluke
Qty 1
Cond. new
City Dammam
Price 1,553 sar
More The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. Specifications Nominal current range 30 A 300A 3000A Continuous current range 1 A - 30 A 1 A - 300 A 1 A - 3000 A Maximum non-destructive current 4000 A Lowest measureable current 1 A Basic accuracy 2% + 2 A (48-65 Hz) % reading + floorspec Useable frequency 10 Hz - 100 kHz Output level(s) 10 mv/A 1 mv/A 0.1 mv/A
More Details
ID 1/52
Type Metering Equipments
Tester DIGITAL MULTI METER-FLUKE 83 V
Make Fluke 83 V
Qty 2
Cond. new
City Dammam
Price 1,235 sar
More Screen shows Error in one meter. Fluke 83V delivers the accuracy and advanced troubleshooting capabilities you need. 6000 count display resolution. The most trusted industrial multimeter in the business. Specifications: [Max. DC volts 1000 V Accuracy ±(0.1% + 1) Max. resolution 100 µV] [Max. AC volts 1000 V Accuracy ±(0.5% + 2) Max. resolution 0.1 mV] [Max. DC amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(0.4% + 2) Max. resolution 0.01 mA] [Max. AC amps 10 A (20 A for 30 seconds maximum) Amps accuracy ±(1.2% + 2) Max. resolution 0.1 µA] [Max. resistance 50 MΩ Accuracy ±(0.4% + 1) Max. resolution 0.1 Ω] [Max. freq= 200 kHz Accuracy ±(0.005% + 1) Max. resolution 0.01 Hz]
More Details
ID 1/51
Type Tools
Tester Electronic two speed Drill
Make METABO BDE 1100
Qty 2
Cond. new
City Dammam
Price 1,053 sar
More Robust die cast aluminium gear housing for optimum heat dissipation and durability. Rated input power 1100 W Output power 620 W Drill Ø steel 16 / 10 mm // 5/8 / 3/8 " Drill-Ø soft wood 40 / 25 mm // 1 5/8 / 1 " No-load speed 0 - 640 / 0 - 1200 rpm Revolutions at rated load 430 / 800 rpm Gears 2 Maximum torque 55 / 22 Nm // 487 / 195 in-lbs Collar diameter 43 mm / 1 11/16 " Chuck capacity 3 - 16 mm // 1/8 - 5/8 " Drill spindle thread 5/8 " - 16 UN Weight (without power cable) 4.3 kg / 9.5 lbs Cable length 2.5 m / 8 ft
More Details
ID 1/50
Type Tools
Tester Multi level Coax Striper
Make FLUKE-11231257
Qty 1
Cond. new
City Dammam
Price 53 sar
More Fluke Networks’ line of cable strippers includes a double slotted cable stripper for 22/24 AWG wire installation, and a coax stripper to perform 2-level and 3-level stripping of RG58/59 coaxial cables. We also offer a combo stripper that cuts and rings Teflon®, smoothly slits fiber, copper and coaxial cables, and rings 25-100 pair cable.
More Details
ID 1/49
Type Metering Equipments
Tester Digital Tester
Make ISI TESTON DM-4352
Qty 1
Cond. new
City Dammam
Price 175 sar
More 3249 Counts digital display. Basic accuracy : DC V : 0.5% AC V : 2.0% OHM : 1.5% Multi measuring function, V, OHM, HZ, Continuity check and diode check. Maximum DC voltage measuring capacity is 1000V. Maximum AC voltage measuring capacity is 750V.
More Details
ID 1/48
Type Metering Equipments
Tester Clamp Meter
Make WAVETEK
Qty 1
Cond. new
City Dammam
Price 186 sar
More General Specifications Display: 3 3/4 Digit LCD, max. reading of 3999. Overrange Indication : “OL” indicated. Measuring Rate: 4/sec, nominal. Low Battery Indication: . Replace battery immediately. Auto Power Off: Approx. 30 minutes after no function change.
More Details
ID 1/47
Type Tools
Tester KWIK STEPPER -Step Bit
Make GREENLEE
Qty 1
Cond. new
City Dammam
Price 245 sar
More Greenlee Kwik Stepper Bit - 34403 Specifications: • Hole Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8" • Capacity: Cut up through 3/8" (9.5 mm) mild steel, copper, brass, aluminum, wood, plastic and laminates. • Overall Length: 3-9/16" • Minimum Chuck Size: 3/8" • Maximum Material Thickness: 10 gauge
More Details
ID 1/46
Type Tools
Tester Pump plier
Make GREENLEE -0451-12M
Qty 1
Cond. new
City Dammam
Price 104 sar
More Greenlee 0451-12M Specifications: • Overall Length: 12" (30.5 cm) • Weight: 1.29 lbs. (.59 kg) • Adjustment Groves: 7 • Jaw Capacity: 2-1/4" (5.7 cm) Greenlee 0451-12M Features: • Custom grip allows area for user identification. • Slip-proof, ergonomic molded grip for increased comfort and reduced user fatigue. • Wider grip design provides larger load bearing area.
More Details
ID 1/45
Type Tools
Tester Pump plier
Make GREENLEE-0451-10M
Qty 1
Cond. new
City Dammam
Price 94 sar
More Description: Custom grip allows area for user identification• Slip-proof, ergonomic molded grip for increased comfort and reduced user fatigue•Wider grip design provides larger load bearing area. Specifications: Adjustment Grooves : 7•Grip Length : 10.000 IN• Grip Type : Molded• Jaw Capacity : 2.000 IN (5.100 CM)• Overall Length : 10.000 IN (25.400 CM)• Standard : ASME/ANSI• Weight : 0.830 LB (0.380 KG)
More Details
ID 1/44
Type Metering Equipments
Tester Wireless MultiMeter -CNX T3000 Basic Kit
Make Fluke-CNX T3000
Qty 1
Cond. new
City Dammam
Price 2,266 sar
More The CNX 3000 Wireless Multimeter offers: True RMS AC and DC voltage measurements to 1000V True RMS AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements CAT III 1000 V; CAT IV 600 V; IP54 The CNX t3000 K-Type Wireless Temperature Module provides: Temperature measurements from -200 °C to 1372 °C ± 0.5% accuracy Memory recording up to 65,000 readings Backlit LCD display IP42 with thermocouple attached
More Details
ID 1/43
Type Metering Equipments
Tester Insulation Multimeter 1587T
Make Fluke
Qty 4
Cond. new
City Dammam
Price 2,266 sar
More Features True RMS voltage and current for accurate measurements. Digital display counts of 6000. Auto-range and manual range for easy testing. Insulation Specifications Measurement Range 0.01 to 100 MΩ Test Voltages 50 V, 100 V Accuracy : + 20%, -0% Insulation Test Current 1 mA nominal Auto Discharge Discharge time < 0.5 s for C = 1 µF or less Maximum Capacitive Load Up to 1 µF load
More Details
ID 1/42
Type Tools
Tester 718 Cable Cutter
Make GREENLEE
Qty 1
Cond. new
City Dammam
Price 228 sar
More Item Weight 3.07 pounds (1.38 kg) Product Dimensions 24.3 x 7.2 x 1.5 inches (61.7 x 18.3 x 3.8 cm) Item model number 718 Is Discontinued By Manufacturer No Material Alloy Steel Power Source Hand Powered
More Details
ID 1/41
Type Metering Equipments
Tester Digital Clamp Meter
Make CEM - DT-266
Qty 1
Cond. new
City Dammam
Price 20 sar
More Screen Damaged. CMOS integrated circuit and dual slope. Features a LCD screen that displays accurate values. Will auto turn off after starting up 25 minutes. Specifications Voltage DC 1000 V, AC 750 V Current 200-1000 A Resistance 200-20000 Ohms
More Details
ID 1/40
Type Metering Equipments
Tester Carbon monoxide meter
Make Fluke CO-220
Qty 1
Cond. new
City Dammam
Price 1,069 sar
More CO-220 product highlights include:  Rugged case and electronics.  Large LCD displays CO levels from 0 to 1000 ppm.  Bright back-light allows easy screen viewing under dim lighting conditions.  Beeper triggers with increasing frequency as CO levels increase. Measurement specifications [Range: 0 to 1000 ppm] [Resolution: 1 ppm] [Accuracy: 3%]  Stabilized electrochemical CO specific sensor with 2 second warm-up.  Typical three year life; one year calibration cycle.  Battery life typical 500 hours with alkaline battery.
More Details
ID 1/39
Type Metering Equipments
Tester Infrared Temperature probe
Make Fluke 80T-IR
Qty 1
Cond. new
City Dammam
Price 223 sar
More The probe has a temperature range of -18°C to 260°C (0°F to 500°F), with a basic accuracy of 3% of reading, and an output of 1 mV dc per °C or °F. Ambient Operating Range: 0 to 63°C (32 to 145°F) Accuracy (for 1 year): ±3% of reading or ±3°C(±5°F), Response Time: 1 second Spectral Response: 8 to 14 microns nominal Emissivity: pre-set 0.95 Output: 1 mV/degree °C or °F Relative Humidity: 95% RH or less @ 30°C (86°F) noncondensing,Temp. Coef. applies Storage Temperature: -25 to 70°C (-13 to 158°F) without battery Power: 9V battery; (NEDA 1604A, 6F22, 006P) Battery life (Alkaline): 50 hours typical, @ 23°C (73°F) 33% duty cycle
More Details
ID 1/38
Type Metering Equipments
Tester Circuit breaker finder and ac cable tracker
Make AMPROBE- ECB50A-E
Qty 2
Cond. new
City Dammam
Price 295 sar
More AMPROBE- ECB50A-E -Specifications Transmitter voltage range 100 V to 250 V Power consumption Approximately 1 W Frequency range 50/60 Hz Transmission frequency Approximately 8 kHz Transmitter frequency Approximately 10 Hz Receiver tracing depth for fuse identification Approximately 0 to 10 cm (4 in) depending on local conditions Tracing depth for cable location Approximately 0 to 40 cm (15 in) depending on local conditions
More Details
ID 1/37
Type Metering Equipments
Tester Universal Temperature Probe
Make Fluke 80T-150U
Qty 2
Cond. new
City Dammam
Price 1,357 sar
More A self-contained temperature-to-voltage converter, this probe is designed to provide a direct temperature reading when it is connected to any high impedance DMM capable of 1 mV resolution, and at least a 300-count full-scale readout capability. Specifications * The 80T-150UA will achieve rated accuracy when it is used with any 0.25 % DMM that has an input impedance of ≥1 MΩ. * Electrical Measurement Range: (See Probe Limitations) -50 to +150 °C & -58 to +302 °F . * Sensitivity (80T-150UA output): 1 mV dc / °C or °F * Voltage Standoff: 60 V dc or 30 V ac rms (42.4 V peak) * Settling Time: 9.5 seconds to settle within 2 ° for a 50 ° change * RF Field: The 80T-150UA product is unspecified in environments with EMC fields greater than 100 mV/meter. ESD performance is specified as Criteria B per EN61326.
More Details
ID 1/36
Type Metering Equipments
Tester True-rms AC/DC Clamp meter-FLUKE 355
Make FLUKE
Qty 1
Cond. used
City Dammam
Price 2,858 sar
More Under Repairing Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A ac, and 2000 A DC The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors CAT IV 600 V, CAT III 1000 V rating for added user protection In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability Accurately measure frequency up to 1 kHz for optimum troubleshooting. General Specifications Batteries Six 1.5 V AA NEDA 15 A or IEC LR6 Battery life (with typical usage, backlight off) 100 hours Test leads Rated to 1000 V Weight .814 kg (1.8 lb) Jaw size 58 mm (2.28 in) Dimensions (L x W x D) 300 x 98 x 52 mm (12 x 3.75 x 2 in) Safety rating IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III
More Details
ID 1/35
Type IED Relay
Tester SEL-2505 REMOTE I/O MODULE
Make SEL
Qty 2
Cond. new
City Dammam
Price 1,578 sar
More The SEL-2505 Remote I/O Module has eight digital inputs, eight digital outputs, and a fiber-optic communications port. Use two optical fibers instead of 32 wires between outdoor or remote equipment and the control building to reduce costs, improve safety, and boost reliability. Or, connect an SEL-2505 to a fiber-optic port or transceiver on a protective relay to add digital I/O. Wire the SEL-2505 I/O to relay I/O to add SEL Mirrored Bits teleprotection.
More Details
ID 1/34
Type Protection Relays
Tester SEL-421 ,Protection, Automation, and Control System
Make SEL
Qty 2
Cond. new
City Dammam
Price 15,087 sar
More Apply the SEL-421 for high-speed distance and directional protection and complete control of a two-breaker bay. Protect any transmission line using a combination of five zones of phase- and ground-distance and directional overcurrent elements. A graphical user interface system provides logic and application templates for typical line protection schemes. Patented coupling capacitor voltage transformer (CCVT) transient overreach logic enhances the security of Zone 1 distance elements. Best Choice Ground Directional Element logic optimizes directional element performance and eliminates many directional settings. Optional additional logic prevents Zone 1 overreach on series-compensated lines. Optional incremental components provide subcycle operation for application on critical lines requiring high-speed fault clearing. Optional Time-Domain Link (TiDL) technology and SEL Sampled Values (SV) technology using IEC 61850-9-2 transform the way you modernize your substation.
More Details
ID 1/33
Type Protection Relays
Tester SIEMENS -SIPROTEC 7SJ80
Make SIEMENS
Qty 4
Cond. new
City Dammam
Price 8,803 sar
More The SIPROTEC 7SJ80 relays can be used for feeder protection of high and medium-voltage networks with grounded, low-resistance grounded, isolated or a compensated neutral point. The relays have all the required functions to be applied as a backup relay to a transformer differential relay. The SIPROTEC 7SJ80 features “flexible protection functions”. Up to 20 additional protection functions can be created by the user. Therefore, protection of change for frequency or reverse power protection can be realized, for example. The relay provides circuit-breaker control, further switching devices and automation functions. The integrated programmable logic (CFC) allows the user to add own functions, e.g. for the automation of switchgear (interlocking). The user is also allowed to generate user-defined messages.
More Details
ID 1/32
Type Tan Delta Tester
Tester NR7000
Make WUHAN NANRUI ELECTRIC CO
Qty 1
Cond. new
City Dammam
Price 6,565 sar
More Model NO.NR7000 Power Source AC220V High Voltage Output 0.5 ~ 10kv Accuracy Around Reading *1.5% Resolution Tan Delta: 0.01%, Cx: 1PF Measuring Range 0.01% < Tan Deltaa < 100% Power Supply AC 220V+ /-10% , 50/60+/-1Hz Relative Humidity < 80%Rh Temperature 15 - 50 Centigrade (No Condensation) Dimension 460*345*345 (mm) Transport Package Plywood Case Specification 10kV Trademark NANR High voltage output: 0.5 ~ 10kV Increasing by 500V for each level, a total of 20 levels, capacity: 1500V Accuracy: tgδ: ± (reading *1.5% +0.06%) Cx: ± (reading * 1.5% +5 PF) Resolution: tgδ: 0.01% Cx: 1pF Measuring range: 0.01% < tgδ < 100% Internal applied high voltage: 3PF ~ 60000PF/10KV 60PF ~ 1µF/0.5KV External applied high voltage: 3PF ~ 1.5µF/10KV 60PF ~ 30µF/0.5KV Power supply: AC 220V ± 10% 50/60 ± 1Hz
More Details
ID 1/31
Type Insulation Resistance Test Set
Tester NR3110
Make WUHAN NANRUI ELECTRIC CO
Qty 1
Cond. new
City Dammam
Price 2,813 sar
More NR3110 INSULATION RESISTANCE TESTER Brand Name: NANR Model Number: NR3110 Display Type: Digital Only Measuring Range: 0.001~1000GΩ Testing Voltage:500V/1000V/2500V/5000V Accuracy Class: ±10%RDG+1d Operating Temperature: 0~40 Dimensions: 270mm*210mm*100mm Working voltage(V): Rated voltage*(1±10%) Rated voltage (V): 500V/1000V/2500V/5000V Measuring range: 0.001~1000GΩ Maximum error: ±10%RDG+1d Output short circuit: ≥1.5mA / ≥5mA Absorption ratio and polarization index: Measuring range: 0.1~19.99; the max error: ± 2%RDG + 1d Power consumption: ≤ 10W Working environment: temperature: 0℃- 40℃ , humidity: ≤ 85% RH Withstand voltage: AC2.5kV 50HZ 1min Working power: 14.8V (2.2Ah)rechargeable lithium ion batteries.
More Details
ID 1/30
Type Insulation Resistance Test Set
Tester HIGH VOLTAGE INSULATION TESTER
Make WUHAN
Qty 1
Cond. new
City Dammam
Price 546 sar
More HIGH VOLTAGE INSULATION TESTER Specifications: * Rated Voltage: 500V/1000V/2500V/5000V * TestingRange: 500V: 0.0~999MΩ ; 1000V: 0.0~1.99GΩ ; 2500V: 0.0~99.9GΩ ; 5000V: 0.0~1000GΩ * Accuracy: ± 5%rdg± 5%dgt * DC/AC Testing: 30~600V * Resolution: 1.0V * Overload Protection: AC 1200V/10 sec * Withstand Voltage: AC8320V/5 sec * Insulation Resistance: 1000MΩ /DC1000V * Line Probe
More Details
ID 1/29
Type CT & PT Analyzer Test Set
Tester MVCT VT & CT ANALYZER
Make MEGGER
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More MVCT VT & CT ANALYZER TECHNICAL FEATURES ■Automatic testing according to ANSI C57.13; IEC 60044-1; IEC 60044-6; or IEC 61869-2 on Relaying/Protection Class CTs., and IEC 61869-3 on inductive voltage transformers ■Excellent noise immunity from energized power lines in substations ■CT ratio and phase measurement with consideration of nominal and connected burdens • Primary currents from 1% to 200% of the rated value • Various burdens of 1/8, ¼, ½, and full ■Ratio accuracy to +- 0.05% ■CT & VT winding resistance measurement ■Automatic demagnetization of CT after test ■Decoupled demagnetization routine that can be performed at any time ■Reduced Testing time with concurrent measurement of multi ratio C Ts ■Small and lightweight ( < 20lb / 9.07kg ) ■Increased level of safety using low voltage DC methods ■Remote control interface ■Easily configurable test plans ■Customizable reports ■CT knee point voltages up to 30 kV
More Details
ID 1/28
Type 1 Ph. Secondary Test Set
Tester SVERKER 760 RELAY TEST SET
Make MEGGER
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More SVERKER 780 RELAY TEST SET Relay TestingSVERKER 750/780 is intended primarily for secondary testing of protective relay equipment. Virtually all types of single-phase protection can be tested. You can also test three-phase protection that can be tested one phase at a time, and also a number of protective relay systems that require phase shifting GeneralMains voltage115 / 230 V AC, 50 / 60 HzPower consumption (max)138 0 WProtectionThermal cut-outs, automatic overload protection. SVERKER 780 can test voltage relays with a frequency range from 15 Hz up tp 550 Hz. Auxiliary voltage sourceProvides 20-220 V DC in two ranges. Current source Provides 0-250 A AC, 0-250 V AC or 0-300 V DC, depending on the output hat is being used.
More Details
ID 1/27
Type 3 Ph. Secondary Test Set
Tester FREJA 543 PROTECTIVE RELAY TEST SYSTEM
Make MEGGER
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More FREJA 543 PROTECTIVE RELAY TEST SYSTEM Fully automated testing using FREJA Win software Stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate 4 Voltage channels, 3 Current channels High current, high power output – up to 60 Amps / 300 VA rms per phase Dynamic GPS satellite synchronized end-to-end testing capability IEC 61850 testing capability
More Details
ID 1/26
Type Lugs and Termination Accessories
Tester COMBIFLEX LUGS ABB 2.5MM
Make ABB
Qty 200
Cond. new
City Dammam
Price 5 sar
More ABB lugs 1MRK001593-1 General Information Product ID:1MRK001593-1 Technical Information: 0.5-1.5,2.5 mm2, 10A, 20A
More Details
ID 1/25
Type Lugs and Termination Accessories
Tester COMBIFLEX LUGS ABB 1.5MM
Make ABB
Qty 200
Cond. new
City Dammam
Price 5 sar
More ABB lugs 1.5mm ABB lugs 1MRK001593-1 General Information Product ID:1MRK001593-1 Technical Information: 0.5-1.5,2.5 mm2, 10A, 20A
More Details
ID 1/24
Type Test Plug
Tester MMLB 01 Test Plug
Make GE ALSTOM AREVA
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More Test Plug Specifications: * 28 x 4mm numbered sockets * Can be mounted adjacent to 4U rack height relays and systems * Eliminate the need to disturb protective system wiring for testing * Monitoring, isolation and secondary injection testing simplified * The MMLB 01has been designed to take 4mm stackable retractable shrouded plugs to provide enhanced finger safe protection. * This Test Plug comes with 6 shorting plug links, * comprised of 2x4mm stackable plugs with retractable shrouds joined by 150mm cable.
More Details
ID 1/22
Type Protection Relays
Tester Over Current- 7SJ8011-5EB90-1FA0 L0A
Make SIEMENS
Qty 4
Cond. new
City Dammam
Price 3,220 sar
More Overcurrent protection Enclosure 1/6 19, 4 x I, 3 BI, 5 BO (2 change-over contacts), 1 live contact, Measuring inputs: Iph = 1 A/5 A, Ie = 1 A/5 A, Rated auxiliary power: 60 to 250 V DC,115 V AC, 230 V AC Installation encl., Screw terminals Region world, IEC / ANSI, English (changeable), Front membrane standard, System interface port B (device underside, rear) PROFIBUS DP slave, elect. RS485 without system interf. Port A, Measurement: Fault recording, Functionality: Basic version, without auto reclos., without fault locator
More Details
ID 1/21
Type CT & PT Analyzer Test Set
Tester MRCT
Make Megger
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More MRCT ORDERING INFORMATION (Full Options) D 0 A 3 R 3 U 2 M 1 L D=Standard Method and DC Technique for knee points up to 30 kV 0 Reserved for future use A = Relay testing; CT testing: Inductive VT testing and capacitive VT testing 3 = IEC61850 GOOSE & Enhanced RTMS Enabled R = Integrated insulation resistance test 3 = IEC Overlay U = United Kingdom 2 = Onboard display w/long enclosure M Reserved for future use 1 = With Bluetooth L = Long leads
More Details
ID 1/20
Type Metering Equipments
Tester Digital Multi meter HPL emfis vifd
Make HPL
Qty 40
Cond. new
City Dammam
Price 107 sar
More Electrical Panels - Industrial LT Panels. Motor Control Centres, Distribution Contol & Relay Panels. Air Conditioning and Refrigeration Panels.Genset Panels. Generation, Transmission and Distribution Panels. Test Benches and Laboratory Equipment. Uninterrupted Power Supply. Special OEM Application.
More Details
ID 1/19
Type Metering Equipments
Tester Multimeter – ISKRA MC330
Make ISKRA
Qty 16
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More Voltage and current auto range measurements up to 600 VL‐N, 12.5 A o Active energy accuracy class 0.5S o Up to four I/O modules (analogue output, pulse output, alarm output, tariff input) o 4 Energy counters with tariff clock or tariff input o Internal recorder 8MB o MODBUS, DNP3, M‐Bus or PROFIBUS DP‐V0 o Certified ship version
More Details
ID 1/18
Type IED Relay
Tester ABB-Debug Line 1MRB380084
Make ABB
Qty 1
Cond. used
City Dammam
Price 3,000 sar
More ABB Type Designation:Certification Level 1 Gross Weight:0.172 kg Invoice Description:CONVERTER CABLE HMI_PS Technical Information:For REF 542Plus V4 HMI Can be used also for REF/REM/RET 541/3/5 and REX relays
More Details
ID 1/17
Type IED Relay
Tester ABB-Debug Line 1MKC950001-2
Make ABB
Qty 3
Cond. new
City Dammam
Price 2,500 sar
More ABB-Debug Line 1MKC950001-2 General Information Product ID: 1MKC950001-2 ABBType Designation: OPTO/9-POLE D-SUB CatalogDescription: Front Connection Cable Additional Information ABBType Designation: OPTO/9-POLE D-SUB Gross Weight: 0.1 kg Invoice Description: Front Connection Cable
More Details
ID 1/16
Type Protection Relays
Tester FANOX SIA-B
Make SPAIN
Qty 225
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More SIA-B is Dual & Self-powered Overcurrent and Earth Fault Protection Relay Features: • Dual & Self powered OC&EF protection relay using the operating current through specific current transformers. • Stores up to 100 events and DFR (4 fault reports in data format) in non-volatile RAM memory. • 1 input, LEDs and Configurable outputs thanks to Programmable Logic Control (PGC). • Test menu allows the trip circuit to be tested before the transformation center is powered up. • Bistable magnetic indicator which indicates the trip condition, maintaining its position even though the relay loses the supply (flag). • Self diagnosis of the status (WATCHDOG) through led. • Internal Commissioning battery as optional. (Lithium battery: 20 years lifetime).
More Details
ID 1/15
Type Test Plug
Tester 129A062G10
Make ABB
Qty 1
Cond. used
City Dammam
Price 100 sar
More In-Service Series Test Plug * The “In-Service” Series Test Plug with a maximum of 10 positions is designed to match the pole configurations of specific styles of FT Flexitest devices (either FT-1, FT-1F, FT-1X switches or FT case relays). When using an In-Service Series Test Plug for current measurements, connections from the Test Plug to the measuring instruments must be made before inserting the Test Plug in place.
More Details
ID 1/14
Type Test Plug
Tester ABB 7B4618G05 Individual Current Circuit test plug
Make ABB
Qty 8
Cond. used
City Dammam
Price 100 sar
More Quantity : 8 Match to in flexitest relay case ABB 7B4618G05 Current Circuit Test Plug The Individual Current Circuit Test Plug allows in service current measurement with an ammeter. It can be inserted in the current test jack of FT Flexitest devices after opening the knife blade switch. This plug consists of two conducting strips separated by an insulating strip. The ammeter is connected to these strips by terminal screws and leads carried out through holes in the back of the insulated handle.
More Details
ID 1/13
Type Test Plug
Tester In Service Series Test Plug 292B319G23
Make ABB
Qty 1
Cond. used
City Dammam
Price 375 sar
More Suitable for Flexitest FT-1 Switch arrangement or FT Relay case Manufacturer ABB / ITE / BBC Product Family FLEXITEST For Equipment Type RELAY Tool Type TEST PLUG Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 5 lb
More Details
ID 1/12
Type Contact Resistance & DLRO. Test Set
Tester MOM600A
Make Programma
Qty 1
Cond. used
City Dammam
Price 16,000 sar
More Application field: The instrument is intended for use in high-voltage substations and industrial environments. Protection: Thermal cut-outs and miniature circuit breakers. Mains voltage: 230 V or 115 V AC ± 10%, 50-60 Hz Dimensions: 356 x 203 x 241 mm (14.0" x 8.0" x 9.5") Dimensions transport case: 610 x 290 x 360 mm (24.0" x 11.4" x 14.2") Weight: 25 kg (55 lbs). 41.1 kg (90.8 lbs) with accessories and transport case. Cable set: 2 x 5 m (16 ft)/50 mm2 (current cables), 2 x 5 m (16 ft)/2.5 mm2 (sensing cables)
More Details
ID 1/11
Type IED Relay
Tester REF615 Feeder protection Relay
Make ABB
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More REF615 FEEDR PROTECTION RELAY Model Name/Number REF615 Relay Type Voltage Relay Voltage 220 V Voltage Type AC Frequency 50 Hz Power Source Electric
More Details
sold out
ID 1/10
Type IED Relay
Tester RED670 Line differential protection
Make ABB
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More No More Informations
ID 1/9
Type Control Switch
Tester SERIES 95 CAT,NO.9524204B-003
Make USA
Qty 1
Cond. used
City Dammam
Price 300 sar
More Control Switch 4 Position 2 contacts close at each Position and other 6 contacts is Open
More Details
sold out
ID 1/8
Type IED Relay
Tester RED670 Line differential protection
Make ABB
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More Bay Control IED fr=50/60Hz EL=90-250 VDC MADE IN ABB
ID 1/7
Type IED Relay
Tester REF615 Feeder protection Relay
Make ABB
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More REF615 is a dedicated feeder protection relay designed for the protection, measurement and supervision of utility substations and industrial power systems.
More Details
sold out
ID 1/6
Type IED Relay
Tester RED670 Line differential protection
Make ABB
Qty 1
Cond. new
City Dammam
Price contact (00966)0561464111 for a deal
More No More Informations
ID 1/4
Type Test Plug
Tester Test Plug 1164046
Make ABB
Qty 5
Cond. new
City Dammam
Price 2,131 sar
More SPECIFICATIONS Manufacturer ABB / ITE / BBC Product Family FLEXITEST For Equipment Type RELAY Tool Type TEST PLUG Shipping Width 9 in Shipping Height 9 in Shipping Depth 9 in Shipping Weight 1 lb
More Details
ID 1/3
Type LOCK-OUT RELAY
Tester LOCK-OUT RELAY SERIES 24
Make ELECTROSWITCH
Qty 5
Cond. new
City Dammam
Price 1,962 sar
More RESET VOLTAGE 125V DC TRIP VOLTAGE 250V DC Mechanical Specifications [Switch sections 1-15] [Switch poles 1-60] [Switch positions 2] [Switch detent angle 45°] Electrical Specifications [Continuous rating 30A-600V] [Max. making ability 95A] [Momentary current 3 seconds, 200A] [30 seconds, 75A] [60 seconds, 60A] Interrupting current 120VAC, 20A 600VAC, 6A 125VDC, 3A 240VAC, 15A Overload current 120VAC, 95A 240VAC, 65A 600VAC, 35A Dielectric strength 2200Vrms Insulation resistance 100 megaohms Contact resistance 10 miliohms 9 different Trip Coil to choose Up to 30 N/O and 30 N/C contacts in one standard LOR Available with either Manual or Electric-Reset capability Available Push-To-Trip function
More Details
ID 1/2
Type FT SWITCH
Tester FT1-073 498A020G01 A CT TYPE
Make ABB
Qty 1
Cond. new
City Dammam
Price 200 sar
More ABB FLEXITEST SWITCHES, TYPES FT-1 (10 POLE, REAR CONNECTED)AND ASSOCIATED TEST PLUGS PROVIDE A SAFE, SIMPLE, FAST AND RELIABLE METHOD TO ISOLATE AND SERVICE INSTALLED EQUIPMENT.ALL FLEXITEST SWITCHES ARE RATED AT 600 VOLTS AND 30 AMPS.
More Details
ID 1/1
Type FT SWITCH
Tester FT1-001 129A501G01 B VT-TYPE
Make ABB
Qty 5
Cond. new
City Dammam
Price 181 sar
More ABB FLEXITEST SWITCHES, TYPES FT-1 (10 POLE, REAR CONNECTED)AND ASSOCIATED TEST PLUGS PROVIDE A SAFE, SIMPLE, FAST AND RELIABLE METHOD TO ISOLATE AND SERVICE INSTALLED EQUIPMENT.ALL FLEXITEST SWITCHES ARE RATED AT 600 VOLTS AND 30 AMPS.
More Details